What is a tubular belt conveyor?
The system of fpc1 conveyor is a curvilinear transmission system with a closed-form structure, which has a wide range of applications, including various types of dispersing materials. Do you know what conveyors are used in the loading and unloading areas of the conveying system? In general, it adopts the open fpc2 belt conveyor. As you can see, there will be a difference in the loading area, and after a certain distance, the closed tubular structure will be formed. Finally, the orientation is done by the roller group with a hexagonal arrangement. When approaching the unloading area, you need to pass through the last roller group, and then the tape will open automatically. Transporting material to the next destination is what it will accomplish.
If you use a tubular conveyor belt, you can easily cope with horizontal and vertical turns and a larger tilt. Because of the enclosed structure design, the material can be ensured without external influence. For example, weather conditions. Material loss needs to be prevented, dust should be reduced as far as possible, because you need to protect the environment.
In addition, do you know what is the use of fpc3 conveyor? It can meet some special requirements. For example, in the upper part of the conveying section and the return leg, you can carry on the material delivery at the same time, or use the power regeneration to lean down to carry on the material delivery. It has been widely used in cement plants, power plants, ports and chemical, steel and mining industries.
Do you know what the fpc2 conveyor does in the berman group? It can adapt to various applications flexibly.
Its information:
Technical parameters:
Its diameter is between 150 and 650 mm, and its center distance can reach 10 km. Its turning radius: 300 x. Fabric conveyor belt diameter is 600 x, its diameter steel cable core adhesive tape Angle can reach 30 °. Of course, this is determined according to the delivery material
Advantages:
The protection of materials is not affected by external influences. Meanwhile, you can see that in the delivery process, there is no dust, which can achieve the purpose of protecting the environment. You can use a sharp turn radius to overcome the steep dip Angle, which has a small footprint, so no transit tower is required. It can flexibly adapt to the terrain conditions, and it can also be inclined downward. The upper conveying section and the return segment can carry different materials simultaneously. Its investment cost is low, at the same time, maintenance cost is low, finally, its operation safety is high